Avix Supercharger 60 | Aeroshop

The SuperMasterCharger is a precision instrument designed to charge and analyze (discharge) NickelCadmium, Sealed Lead-Acid and many other types of rechargeable batteries (10A-Hr to 100A-Hr). With its multiple modes of operation (Constant Current, Constant Voltage, Peak Charge Modes, Analysis and Deep Cycle Discharge Modes), the SuperMasterCharger can satisfy the requirements of most rechargeable battery systems. A special Constant Resistance discharge mode is now provided for those batteries that specify capacity testing with a resistive load. Two large digital meters permit the simultaneous monitoring of voltage and current, while eight indicator lights inform of the status of the operation. An integral, four digit LED digital timer provides time interval programming in HOURS-MINUTES and optionally in MINUTES-SECONDS. A rechargeable battery provides backup for short power interruptions. part Number:SUPERCHARGER60 Features Charge Mode:CC/CV/CP/Peak Xfer/Peak Stop AC input: 115V/208V/230V/245VAC Weight: 175 lbs Width: 28 in Depth: 29 in Height: 25 in Two Battery Testing Three Charge Modes (0 to 50A):Constant Current (single and dualrate Peak Transfer/Peak Stop Constant Voltage (float) Three Discharge Modes (0 to 60A): Analysis (Capacity Test) Deep Cycle Constant Resistance Battery Temperature Monitoring Interfacing to the BTAS-16 Battery Management System for monitoring, programming and control Fully Protected: overcurrent, short circuit, reverse polarity, overheat, open circuit Benefits Battery Over-temp Battery Temperature monitoring by way of an external cable or Temp Plate Overheat Monitoring of internal Heat Dissipators Power Failure Internal rechargeable battery Current Microprocessor monitored for over and under current faults Fusing for Line, Charge output and Discharge output Aircraft Application Airbus Helicopters