FoxCart Model 2000 Power Cart | FoxCart GSE LLC

The model 2000 power cart features an all-steel chassis frame with three-piece box siding. Handles at each end enable movement, and the power cables can either be wrapped around them or coiled on top of the unit for storage. Both power cables are clamped internally to the frame to reduce strain. Nominal output power is 1000 Amps DC at 28 VDC* continuous, 2000 Amps starting current at 24 VDC (Output amerage has approximately 10% reduction on 50 Hz power) Input power requirements: 208-480 VAC 60 Hz, three phase, (input adjustable power strapping), 208-240 Volts, three phase, 100 Amps per phase** 380-480 Volts, three phase, 70 Amps per phase** Physical dimensions: standard model FoxCart 50.5" L x 30" W x 31.5" H with terrain wheels; 50.5 L x 30 W x 38 H, weight 550 pounds Warranty: FoxCart GSE warranties each new FoxAir free of defects in material and workmanship under normal use and service for a period of one year from date of shipment * Ratings are based on the point where Voltage sags to 23 Volts ** Required for engine starts only Features: Power cable can be coiled on top or wrapped around the handles for easy storage Heavy duty caster wheels that can be locked in place to prevent movement Reverse current protection Output power is adjustable between 24 VDC 32 VDC in seven (7) position steps Standard FoxCart includes a 50 foot 6/4 wire AC cable with a Hubbell 460P7W connector and a 20 foot 2/0 DC cable with Anderson aircraft connector Accessories: Wall receptacle kit 25 foot DC 2/0 cable with molded Anderson Aircraft connector Dual DC plug assembly UL/CSA Riser Kit (please specify mobile or fixed) Options (not included unless ordered by customer): SoftStart that limits starting current to 1,100 Amps 14/28 VDC mode control that provides switchable output of 14 VDC or 28 VDC Extra weatherproofing treatment Extra length 6/4 AC cable115 Volt service outlet stepdown transformer; required if voltage exceeds 250 VAC