Henkel Loctite Hysol EA 9359.3 Epoxy Adhesive Kit AS9318011, 50 g dual cartridge | Henkel Structural Adhesives

Henkel Loctite Hysol EA 9359.3 epoxy adhesive contains yellow colored part-A paste and blue colored liquid part-B. It features slight odor part-A and rubber-like odor part-B. The part-A/B has a flash point greater than 199.4 degrees F. The vapor density of part-A and part-B component is greater than 1 and 1.02 respectively. The viscosity of part-A composition is 2000 poise while part-B has 1000 poise. It has a service temperature rating of 77 to 180 degrees F. This epoxy compound has a shear strength of 4500 psi at 77 degrees F and takes 5 to 7 days for complete curing. The adhesive has a compressive strength of 21000 psi and a tensile modulus of 310 ksi. This product comes in a 50-gram dual cartridge and allows an elongation of 0.077.Features:Easy to mixNon-sag adhesive formula stays in a place after applying5 mil/0.13-millimeter glass beads for bondline thickness controlPot life of epoxy adhesive is 60 minutesResists water, salt spray and most organic fluidsVOC contents less than 10 grams per liter for part-A/BSpecific gravity of 1.16 for part-A and 1.02 for part-BMix ratio of part-A/B is 100:44 by weightUses carbon dioxide, foam and dry chemicals as fire extinguishing agentsBenefits:A two-component structural adhesive exhibits high peel and tensile lap shear strengthOffers high performance and excellent environmental resistanceApplications:Bonding films, metals and honeycomb assemblySpecifications:OSHA (29 CFR 1910.1200) Certified