EA9309 NA 50 GRAM EZ PA, 50CS | Henkel Structural Adhesives

EA9309 NA 50 GRAM EZ PA, 50CS | Henkel Structural Adhesives

KIT: ADHESIVE,A/B,QT, EA9320NA | Henkel Structural Adhesives

KIT: ADHESIVE,A/B,QT, EA9320NA | Henkel Structural Adhesives

Henkel Loctite Hysol EA 9309NA Epoxy Adhesive Kit AS9355016, 1 qt | Henkel Structural Adhesives

Henkel Loctite Hysol EA 9309NA epoxy adhesive is a toughened and two-part adhesive that contains beige colored liquid part-A and red colored liquid part-B. It features slight odor part-A and ammoniacal odor part-B. Both the part-A and part-B has a flash point greater than 284 degrees F and 212 degrees F respectively. The vapor density of part-A is greater than 1 and part-B is 8.45. Viscosity of part-A composition is 1500 to 6000 poise while part-B has 0.2 to 0.5 poise. It takes 3 to 5 days at 77 degrees F for complete curing. This adhesive supporting an elongation of 0.1, has a tensile strength of 4500 psi at 77 degrees F and a shear strength of 5000 psi at 77 degrees F. It has a compressive strength of 7000 psi, compressive modulus of 249 ksi and a tensile modulus of 338 ksi. This product comes in a 1-quart container.Features:Cures at room temperature to eliminate need for added process stepsProvides outstanding peel strength to aluminumEstablishes flexible and tough bondOffers immense resistance to water, salt spray and most common fluidsVOC contents less than 10 grams per liter for part-A/BSpecific gravity of 1.02 for part-BMixing ratio of part-A/B is 100:23 by weightBenefits:Effectively aids to get tough and permanent flexible jointsIdeal to use on wide range of surfaces like metals, wood, plastics and glassApplications:Bonding films, metals and honeycomb assemblySpecifications:OSHA (29 CFR 1910.1200) Certified
Henkel Loctite Hysol EA 9309NA epoxy adhesive is a toughened and two-part adhesive that contains beige colored liquid part-A and red colored liquid part-B. It features slight odor part-A and ammoniacal odor part-B. Both the part-A and part-B has a flash point greater than 284 degrees F and 212 degrees F respectively. The vapor density of part-A is greater than 1 and part-B is 8.45. Viscosity of part-A composition is 1500 to 6000 poise while part-B has 0.2 to 0.5 poise. It takes 3 to 5 days at 77 degrees F for complete curing. This adhesive supporting an elongation of 0.1, has a tensile strength of 4500 psi at 77 degrees F and a shear strength of 5000 psi at 77 degrees F. It has a compressive strength of 7000 psi, compressive modulus of 249 ksi and a tensile modulus of 338 ksi. This product comes in a 1-quart container.Features:Cures at room temperature to eliminate need for added process stepsProvides outstanding peel strength to aluminumEstablishes flexible and tough bondOffers immense resistance to water, salt spray and most common fluidsVOC contents less than 10 grams per liter for part-A/BSpecific gravity of 1.02 for part-BMixing ratio of part-A/B is 100:23 by weightBenefits:Effectively aids to get tough and permanent flexible jointsIdeal to use on wide range of surfaces like metals, wood, plastics and glassApplications:Bonding films, metals and honeycomb assemblySpecifications:OSHA (29 CFR 1910.1200) Certified
More Information
Item replacement history Part Number:

AS9355015

Henkel Loctite Hysol EA 9309NA Epoxy Adhesive Kit AS9355015, 1 pt


Part Number:

EA9309NAQT

ADHESIVE: EPOXY,A/B,QT, USE AS9355016=6P


Part Number:

AS9234016

ADHESIVE: EPOXY,A/B,QT, USE AS9355016=6P


Part Number:

AS9234015

ADHESIVE: EPOXY,A/B,PT, USE AS9355015=6P
Country Of Origin United States
Dimensions (L x W x H) 4.19x4.19x8.88& IN
Hazmat Code Hazmat fees or exemptions may apply.
Hazmat(Y/N) Y
MFR Mfr. Part # AS9355016
Shelf Life (in days) 365
Cage Code 02DH4
Part Number AS9355016=6P
Schedule B 3506910000
Featured Brands Henkel Structural Adhesives
Write Your Own Review
You're reviewing:Henkel Loctite Hysol EA 9309NA Epoxy Adhesive Kit AS9355016, 1 qt | Henkel Structural Adhesives
Your Rating